Shur-Flo Tubular Lining

Corrosion, erosion, scale, rod wear, fatigue, pitting, embrittlement, all resulting from very demanding environments downhole tubulars are subject to in today’s energy industry. Check out our lined tubing proven solutions.

SHUR-FLO Liner Advantages

Protects your tubing Investment and adds run time to your producing oil wells. Unbeatable corrosion and chemical protection in both producing and water injection / disposal wells.

  • Reduced rod torques
  • Eliminate harmonics
  • Friction reductions
  • Increased BHP life
  • Less rod wear
  • Eliminate scale build-up

Lined Tubing Applications

  • J.55 and L.80 new and used tubing
  • Lined Tubing
  • Pup Joints
  • Tubing Couplings
  • Swedges
  • Tubing Nipples
  • SHUR-FLO Tubular Lining

Inspection Services

  • Tubing inspected to customer requirements
  • Repaired to API specifications
  • Computerized inventory

GO SHUR-FLO NOW

QUALITY CONTROL AND PROCEDURES TUBULAR GOODS

  • Tubing inspected to customer requirements
  • Repaired to API specifications
  • Tubing is mechanically or steam cleaned to ensure bonding
  • Internally lined and stenciled

Why SHUR-FLO lined tubing should be your only choice for water injection or disposal well applications

  • It is a liner barrier that is mechanically inserted inside the tubing joint
  • The liner will not flake, crack, chip or come off. Your tubing string will always be internally protected… top to bottom
  • Liner is unaffected by turbulent flow
  • Shur-Flo liner has 10 times the erosion capabilities of bare steel
  • Liner is compatible with all stimulation fluids
  • Lined string can be used as work string
  • Tubing joints with liner inserted are virtually rig proof and will not be easily damaged while tripping

Liner Characteristics

We offer 3 different liners for our Shur-Flo lined tubing. Two of these liners are various versions of Ultra High Molecular Weight High Density Polyethylene. The other is a poly-ketone based liner.

Drift ID

60.3 MM (2 3/8″) = 1.60″

73.0 MM (2 7/8″) = 2.00″

88.9 MM (3 1/2″) = 2.50″

114.3 MM (4 1/2″) = 3.40″

SHUR-FLO 1

This is our standard liner option good to 55C (131F) in standard operating conditions. Most water injection applications and disposal well applications are suitable for this liner. Many low to moderate temperature pumping applications are also suitable for this Shur-Flo lined tubing. Working depths to about 1600 meters (5249 Feet) is the limit for this liner option. This liner is black in colour.

SHUR-FLO 2

This liner is a raised temperature HDPE good to 90C (194F) in standard operating conditions. This liner is ideal for higher temperature water injection/disposal wells and pumping wells with extended well depths to 2100 meters. This liner is orange in colour.

SHUR-FLO 5

Proprietary Blend of aliphatic poly-ketone engineered polymer suitable for hydrocarbon applications. Our Shur-Flo 5 Lined Tubing maximum operating temperatures are 160C (310F). Excellent has barrier properties combined with excellent chemical resistance to aggressive chemicals and hydrocarbons, as well as exceptional impact, hoop strength and ductility. This is highly resistant to abrasion and wear. This liner is blue in colour.

SHUR-FLO 3 & 4

No longer available.

Manufacturing & Production

Moore Pipe Brochure

Available for download